EVOLUTION-X
What's under the hood:
Basic stuff
1.Rooted,Deodexed,zipaligned,has init.d support etc..
2.Based on DDKL2
3.A2SD
4.Holo launcher as default launcher
5.A little theming.
6.MIUI music player
Main features
1.This is a barebones rom.It's debloated aggressively and the apks are optimized.
As a result, there is around 90+ mb free in the system partition.
2.Scrolling cache is disabled for smoother scrolling.
3.Lidroid toggles.
4.The kernel by savie has 4 usable frequencies.
832MHz,624MHz,468MHz,and 312MHz.
5.13 governers, 5 I/O schedulers are added.
6.Droid wall support.
7.Some performance tweaks.
8.It has undervolt support.It is undervolted by -120mV by default.
to change the value manually,go to terminal and type the following command
echo -20mV > /proc/sys/bacem/volt/cpu
For the change to stick after boot,you should change the value in the init.d script '01bacem-tweak'.
You can change the value '-20mV' to your desired value.Be carefull to put that - sign in there.
This is not for noobs.I repeat,it's not for noobs.It'll easily screw up your phone if you are not carefull.And as a safety limit dont go below -160mV.The default value is pretty agressive.9.Exellent battery life.
10.Small footprint.
11.Bootanimation,boot sounds,and shutdown sounds are removed.
12.Dualboot support, which means you can boot a 2nd rom from your sd card.
HOW TO INSTALL
1.Download the zip file
2.put it on your sd card.
It is recommended that you have a clean sd-ext before flashing this rom.
3.Switch of your phone and reboot into cwm recovery.This is important because if you are using stock recovery it'll get stuck in the splash screen.
4.Wipe data and cache
5.Install the rom zip file through cwm.
6.Again wipe data and cache.
7.Reboot the system and you are good to go.
You may have to wait a bit for the rom to boot.It'll seem like it is stuck at the splash screen but it's not.There won't be any bootanimation.So dont panic.Just wait.
DOWNLOAD LINK
https://www.dropbox.com/s/gjc8d9vh5l...volution_x.zip
0 comments:
Post a Comment