Saturday, 4 August 2012

[ROM][KERNEL] EVO-X2

Leave a Comment

 [ROM][KERNEL] EVO-X2 [slimmer][minimalist][DDLE1]

EVO-X2






Rooted,Deodexed,zipaligned,has init.d support etc..
Based on DDLE1 firmware
A2SD
TW launcher
MIUI music player
This is a minimalist rom. there is around 99 mb free in the system partition.
Scrolling cache is disabled for smoother scrolling.
Lidroid 15 toggles.
6 lockscreens
swipe to remove notification
The kernel by savie has 4 usable frequencies.
832MHz,624MHz,468MHz,and 312MHz.
18 governers, 5 I/O schedulers are added.
Droid wall
EXT4
cifs
swap
Dualboot
bacem tweak
Undervolt
Default undervolt value is 100mV
Exellent battery life.
Small footprint.
Bootanimation,boot sounds,and shutdown sounds are removed.


HOW TO INSTALL

1.Download the Rom zip file and 'blk_screen_fix.zip'.
2.put them on your sd card.
3.Switch of your phone and reboot into cwm recovery.This is important because if you are using stock recovery it'll get stuck in the splash screen.
4.Install the rom zip file through cwm.
5.Wipe data and cache.
6.Flash the 'blk_screen_fix.zip'
6.Reboot the system and you are good to go.

You may have to wait a bit for the rom to boot.It'll seem like it is stuck at the splash screen but it's not.There won't be any bootanimation.So dont panic.Just wait.






GENERAL FAQ

1. How to set undervolt value and how to know current voltage values ?

A.To change the value manually,go to terminal and type the following command

echo -20mV > /proc/sys/bacem/volt/cpu.Change the value '-20' to your preferred value.
For more info,go here http://forum.xda-developers.com/show....php?t=1640972

Navigate to sys/class/regulator/regulator.5/microvolts to know your current voltage value.The stock value at 832Mhz is 1300000.Since the rom is undervolted by -100mV it should 1200000 @832 Mhz.

2.My phone feels laggy ,what can i do?

A.Change undervolt value to a lower one like -60mV and observe.Try this until you find the right balance.Every phone is different in different aspects,so "one size fits all" does not work here



ORIGINAL THREAD  ROM BY b16h22  




0 comments:

Post a Comment